Practice makes perfect they say. Well, maybe not perfect. But the going seems a little easier when you’ve been there before. So it was for mounting the second fuel tank. It actually fit slightly better than the other one. I knew what to do, and on it went without issue.<\/p>\n\n\n\n
I did the same basic steps as I did for the first tank. I felt confident, and the work went quickly. I had to carefully dress a number of the overlapping holes in the tank and spar with the #20 chucking reamer in the lithium drill. I knew what to expect and there were no surprises. I also had to touch the holes in spar web to align with the outermost Z-bracket so I could get the AN3 bolts through and threaded into the anchor nuts. Once again, I used a length of cord to pull on the Z-bracket while the tank was being fitted for the final time. That worked like a charm.<\/p>\n\n\n\n