Work on the RH wingtip continues. Getting a good fit (matching the wing airfoil) is what I’m after. It has to happen in small steps. I’m getting there.<\/p>\n\n\n\n
The battery box reinforcement channel is going to be tricky to rivet to the firewall. That’s because the shape of the channel overhangs and blocks access for the rivet setting tool. A few of the holes can be riveted from behind, but a couple holes are only accessible from the front. I’ve asked the factory about it. (This channel really should have been mounted before the parachute box was assembled at the factory.)<\/p>\n\n\n\n